Taiyo Kogyo’s work neither starts nor ends with sheet metal fabrication. We design, create the data in CAD/CAM, cut, bend, weld, paint, assemble, wire, inspect and ship.
Taking a product from concept to completion in one plant. That is the value we have delivered since 1961.
Design and CAD/CAM — Talk to Us Even Without Drawings
We have an in-house design department. From a concept, a specification or a hand sketch — “we need an enclosure for this equipment,” “we want to remake this part” — we produce drawings for mechanisms, sheet metal and enclosures. With the shop floor right next to the designers, designs that are easy to make, easy to assemble and predictable in cost are built in from the start.
- Design from a concept or a sampleFrom a specification, rough sketch or sample, we produce drawings for sheet metal, enclosures, frames and mechanical parts.
- 3D CAD → flat pattern → CAMFrom design to sheet metal flat pattern, NC data and bending programs, all in-house.
- VA/VE proposalsManufacture from your drawings, of course — plus proposals for manufacturability and cost reduction.
- No reworkDesign data is the reference for fabrication and inspection, so nothing is lost in translation.

From Design to CAD/CAM to Fabrication
- ConsultationConcept, spec, sample
- MeetingAligning requirements and specs
- Design3D CAD
- CAD/CAMFlat pattern, NC, bending
- BlankingLaser / punch
- Bending / weldingPress brake, CO2/TIG
- PaintingIn-house line
- Assembly / wiringElectrical assembly
- Inspection / shippingData comparison
One-Stop Manufacturing — From Design to Finished Product in One Plant
The accuracy of a part and the accuracy of the assembled product are two different things. When you only deliver sheet metal parts, and something does not fit at assembly, nobody can tell where it went wrong. Taiyo Kogyo keeps assembly and wiring in-house, so we can take responsibility for getting the accuracy right in the assembled state.
- Every process in-houseDesign → CAD/CAM → blanking → bending → welding → painting → assembly → wiring → final inspection.
- Electrical assembly, PSE-compliantFrom electrical component integration to PSE-compliant finished-product assembly.
- Climate-controlled test roomTemperature testing of finished products, in-house.
- Prototype to productionFrom a single prototype to production ramp-up, in the same plant.

Sheet Metal Fabrication — Blanking, Bending, Welding



Blanking
Centered on TRUMPF fiber laser cutting machines and laser-punch combination machines, we can start cutting from 3D data or DXF in a short time. Combination machines linked to automated material storage run unmanned overnight. Large sheets up to 2.0 m × 4.0 m and thick plate with 6 kW are cut in-house.
Bending
Fifteen press brakes from 25 t to 320 t and up to 4.2 m. Small parts and boxes are automated on panel benders; long and thick parts go to the large press brakes. Bending programs from BEND-CAM reproduce complex multi-step bends consistently.
Welding
Semi-automatic CO2, TIG and spot welding. In addition to steel and stainless steel, we have spot welders for aluminum. Post-weld distortion is corrected on a leveler to secure accuracy at assembly.
Assembly and Wiring — Turning Parts into Products


In our final assembly plant, electrical components and units are installed into the fabricated enclosures, wired, and taken through final inspection. Enclosures for telecom and electronic equipment, refrigerated display cases, commercial kitchen equipment — the job is not “making a box” but “making something that works.”
- From parts to final inspectionFrom enclosure parts fabrication to assembly, wiring and final inspection.
- Harnesses and electrical assemblyPSE-compliant electrical assembly.
- Climate-controlled test roomTemperature testing of finished products, in-house.
Prototype to Production — Carrying the Setup Over
We treat a prototype not as a one-off but as part of the production ramp-up. The fabrication data, bending programs and jigs made for the prototype are used as they are in production, so nothing is “different from the prototype” when volumes go up. One-off and single-piece inquiries are also welcome.