Laser-punch combination line
DESIGN · SHEET METAL · ASSEMBLY

From design to the finished product.
One plant, start to finish.

Design, CAD/CAM, blanking, bending, welding, painting, assembly, wiring and inspection. From a first conversation at the concept stage, we draw it up, fabricate it, assemble it and deliver it. No need to find a separate subcontractor for each process. Parts up to 4 m long, from high-mix low-volume to series production.

1961Founded
4mMax. working length (laser / press brake)
6Sites in Tokyo & Gunma
Why Taiyo

Not “we have the machines” — “we get it finished.”

There are many sheet metal fabricators. Customers keep coming back to Taiyo Kogyo for three reasons.

01

One-stop, starting from design

We have an in-house design department, so we can produce drawings from a concept or a rough sketch. Design, CAD/CAM, fabrication, assembly and wiring, and inspection are all connected in the same plant, which means we can take responsibility for both a design that is easy to manufacture and the accuracy of the assembled product.

02

Quality verified by data

A DXF-comparison inspection machine checks part dimensions against the original data instead of relying on visual inspection. A leveler removes distortion before the next process. Quality is supported by a system, not by intuition.

03

A plant that keeps running

An unmanned blanking line that links automated material storage with combination machines, plus 4 m lasers and press brakes. Because the plant actually runs at high utilization, we can meet delivery dates from a single prototype to a production ramp-up.

Bending program (CAM) screen
Design · CAD/CAM

We build from the design up.

Taiyo Kogyo has its own design department. From a concept or rough sketch of what you need, we produce the drawings, create the flat patterns, NC data and bending programs in CAD/CAM, and send them straight to our own fabrication line. You can talk to us even if you have no drawings yet.

  • Design from a concept, specification or hand sketch (mechanisms, sheet metal, enclosures)
  • 3D CAD → sheet metal flat pattern → NC data (CAM), all in-house
  • Ease of manufacture and assembly built in at the design stage (VA/VE)
  • Design data becomes the reference for fabrication and inspection — no rework, no lost information
About design & CAD/CAM
  1. Concept / consultationSketch, specification, sample
  2. Design3D CAD / sheet metal, enclosures, mechanisms
  3. CAD/CAMFlat pattern, NC data, bending program
  4. Fabrication / assemblyStraight to our own line
Panel bender
What we do

Sheet metal, bending and welding,
through to assembly and wiring.

Steel, stainless steel and aluminum. From 0.5 mm precision sheet metal to 4 m long and large parts. We assemble and wire the parts we fabricate and deliver them as finished products.

  • Blanking (fiber laser, laser-punch combination machines)
  • Bending (15 press brakes from 25 to 320 t, panel benders)
  • Welding (CO2, TIG, spot; aluminum capable)
  • Painting, assembly, wiring and final inspection (PSE-compliant electrical assembly)
  • Prototype to series production in the same plant
More about what we do
Data-comparison inspection machine
Quality

Verified against data, not by eye.

Fabricated sheet metal parts are scanned and overlaid on the original DXF data to verify dimensions. Distortion is corrected on a leveler before bending. Because we manufacture end to end, we can take responsibility for accuracy in the assembled state.

  • Data-comparison inspection (DXF scan), 100% or sampling
  • High-precision leveler flattening stabilizes downstream processes
  • Temperature testing of finished products in a climate-controlled test room
How we manage quality
Process

The same flow from design to production.

Design data flows straight into CAM, fabrication data becomes the inspection reference, and prototype setups carry over to production. With every process in one plant, information is never lost along the way.

  1. Consultation / conceptFrom a sketch or spec
  2. MeetingAligning requirements and specs
  3. DesignIn-house design dept.
  4. CAD/CAMFlat pattern, NC, bending program
  5. BlankingLaser / punch
  6. Bending / weldingPress brake, CO2/TIG
  7. PaintingIn-house line
  8. Assembly / wiringElectrical assembly
  9. Inspection / shippingData comparison, temperature test
Fields

Industries we serve

We do not publish customer names. Please browse by industry. We also welcome inquiries from industries we have not worked in before.

  • Refrigerated display casesSheet metal through assembly and finishing
  • Commercial kitchen equipmentStainless steel fabrication and welding
  • Telecom & electronic equipmentEnclosure parts through assembly and wiring
  • Medical devices & fixturesClean enclosures, tube fabrication
  • Biotech & semiconductorEnclosures and frames
  • Steel-frame housing componentsSteel, stainless steel, aluminum
  • Architectural metalworkDelivered to large-scale projects
  • Prototypes & one-offsFrom one piece to production
Press brake line
Recruit

Room to fail, and people who teach you on the floor.

Learn on the latest equipment, next to experienced colleagues. Nationality and experience do not matter. We take the time to train people who can make a living from sheet metal skills.

  • Build your skills on the latest equipment, including 4 m lasers and automated lines
  • Many staff from overseas; multilingual work manuals in preparation
  • A plant where you can see every step of manufacturing, from prototype to production
See career opportunities

Send us a drawing. Even a single sheet.

Material, thickness and quantity do not have to be decided yet. Tell us what you want to build and we will work it out together. Plant tours are welcome.

0276-31-2181Gunma Head Office · Office hours: weekdays 8:00–17:00 (JST)
Contact form