What matters is not owning equipment but knowing how to use it. We keep adding the equipment the work calls for.
This page shows our main equipment in photographs and lists everything we have, by category. Where a model name carries a mark, click it to open a photo.
Main Equipment (Photos)
Punch-laser combination machinesTwo TruMatic 7000 (linked to TruStore 3125 / SheetMaster 7125), 6000fiber (2.0 m × 4.0 m) and 6000L (TRUMPF). Linked to automated storage for unmanned blanking.
Laser cutting machinesTruLaser 3030fiber (6 kW) / 5040fiber (5 kW, 2.0 m × 4.0 m).
Tube laser cutting machinesTwo machines: TruLaser Tube (TRUMPF) and WPB-6025 (Penta Laser). Pipe and sections up to 6 m are cut and pierced in-house.
Long parts up to 4 mTwo 4.0 m lasers and 4.2 m press brakes at 320 t / 230 t. For long and large single-piece parts.
Automated material storageMaterial storage and feeding to the combination machines are automated. Cuts setup time and speeds changeovers in high-mix, low-volume work.
Press brakes15 machines from 25 t to 320 t, including an automatic tool changer (ATC). Bending programs for complex shapes are created in BEND-CAM.
Panel bendersTruBend Center 7030 (3.0 m) / Salvagnini P1. Automated bending of small parts and boxes.
WeldingSemi-automatic CO2 / TIG / MIG (Panasonic, Daihen), spot welders (Dengensha, National, Koyo Giken) and spot welders for aluminum. Four welding robots, one of them fiber-laser welding (8 kW).
Painting linePowder-coating line at the Oizumi Plant: an 85 m conveyor with a far-infrared curing oven, plus a batch booth and oven for large parts (opening 3,100 × 2,450 mm). Fabricated and welded parts are coated in-house, with no round trips to subcontractors.
InspectionData-comparison inspection (DXF) with LaserQC and a wide-area 3D coordinate measuring machine (KEYENCE WM-5210).
High-precision leveler (ARKU)High-precision flattening with an ARKU FlatMaster: distortion from laser cutting is removed before bending (up to 12 mm thick, 1,250 mm wide).
Equipment List
Locations: Gunma Head Office, Yura Plant, Oizumi Plant, Chiyoda Plant and others (Ota City and Ora District, Gunma). Identical models are shown as one row with a unit count.
Equipment is updated from time to time. For the latest status, or to ask which equipment suits your product, please contact us. Plant tours are welcome.
Send us a drawing. Even a single sheet.
Material, thickness and quantity do not have to be decided yet. Tell us what you want to build and we will work it out together. Plant tours are welcome.
0276-31-2181Gunma Head Office · Office hours: weekdays 8:00–17:00 (JST)